The short answer
Japan uses 100V at 50 / 60Hz, with plug types A and B (IEC list). Type A has two flat pins; type B adds a round earth pin.
Look for “INPUT” on the charger, AC adapter or device label (for example “100-240V”). If it shows one number, enter it in both boxes.
- Plug adapter: only changes the plug shape so it fits the outlet. It does not change the voltage
- Voltage converter (transformer): changes the voltage. Only needed when 100V is outside your device's INPUT range. Check the converter's manual for which devices and how many watts it supports
- If a label shows only one frequency (50Hz or 60Hz), check the manual, because Japan uses both (50 / 60Hz) depending on the area
Buying an adapter after you arrive? You can order from Amazon.co.jp and have it sent to your hotel (ask the hotel first) or a convenience store → Ordering from Amazon Japan during your trip
Source: IEC (International Electrotechnical Commission) World Plugs country list (as of June 2025). The IEC no longer publishes this list, so a copy is kept on this site (retrieved 2026-09-27)
Voltage and plugs may differ by region or building.
PR Plug adapter for Japan (Japanese online store)
Lets a type C plug (pins 4.0mm) fit Japan's type A outlets
The store page says: rated 6A, 125V/250V. It cannot change voltage; devices not made for Japan's voltage need a separate transformer.
Note: rated 6A means about 600W at Japan's 100V, so do not use it for devices that draw more than that. Plugs with pins thicker than 4.0mm will not fit.

